Building on the same traditions and standards of quality instilled by
the Danner family years ago, the Danner Shoe Mfg. Company
continues to manufacture a complete line of Hiking, Fishing,
Hunting, Uniform, and Work Boots in their 30,000 square foot factory in Portland, Oregon, U.S.A. 
At Danner we've always used only the best materials and construction techniques. As a result, we manufacture some of the most comfortable, longest-lasting boots in the world. Every component of a Danner boot, from the smallest to the largest, has been thoroughly evaluated and selected to perform at the highest possible level.
Proof is in the details: each piece of rust-resistant hardware is milled to its final size and shape. All lasts and dies are specifically created for whole and half sizes. 

The finest branded materials are used, including Gore-Tex®, Cordura® by DuPont, Vibram® outsoles and Thinsulate® insulation from 3M. And before a Danner boot ends up in your hands, it goes through a rigorous quality testing procedure. 

 
It takes over 200 separate hand operations to make a Danner Stitch-down Boot. The upper is both stitched and glued to the sole. Each boot goes through four quality checks. The result is a durable boot that needs no  break-in and supports the foot in comfort all day long. 
IT IS THE SUM OF THE INDIVIDUAL PARTS
THAT GIVES DANNER ITS POINT OF
DIFFERENCE. 

Every component of a Danner boot, from the smallest
to the largest, has been thoroughly evaluated and
selected to perform at the highest possible level.
Proof is in the details: each piece of rust-resistant
hardware is milled to its final size and shape. All lasts
and dies are specifically created for whole and half
sizes. The finest branded materials are used,
including Gore-Tex®, Cordura® by DuPont,
Vibram® outsoles and Thinsulate® insulation from
3M. And before a Danner boot ends up in your hands,
it goes through a rigorous quality testing procedure.